Hidden Tactics to Fix Netgear Orbi Firmware Update Failed Issue

Netgear Orbi Firmware Update

The Netgear Orbi firmware update process is executed by users so that they can take full advantage of the enhanced performance of their networking devices. However, some of them have reported that they are unable to complete the process using the Orbi login username and password successfully.

In case you are one of those users, then you ought to walk through the troubleshooting tactics discussed further in this article. They will definitely be useful for you. Read on.

[Fixed] Netgear Orbi Firmware Update Failed Issue

  1. Power Cycle the Orbi Device

The very first thing that you should do to troubleshoot the issue that you are facing right now is to power cycle your Netgear Orbi router. Worry not. Power cycling only means you need to restart the networking device by turning it off and on. Once you are done restarting or power cycling your Orbi, see if you are able to update its firmware to its latest version in a hassle-free manner. If not, reading the next hack is recommended.

Remember, just because one troubleshooting hack was not able to assist you well does not mean that the others will force you to have the same fate.

  1. Replace the Ethernet Cable

A weak internet connection can also put a stop to your progress of updating your device. Taking this into account, check the cable with which your router and modem are linked. In case, any damages are found, consider replacing the Ethernet cable, with a new one of course. Once you have connected the router and the modem with the new cable, ensure that the connection established is finger-tight.

  1. Bring the Devices Closer

A lot of distance between the networking devices, i.e. Netgear Orbi and the modem will prevent their signals from propagating. In this way, your system will not be able to gain access to the internet, and you will not be able to update the firmware of your Orbi. So, what you can do in this case is to reduce the distance between your devices by changing the current location of one of them.

By the way, do not keep your networking devices too close to each other. Or else, their signals will clash and cause more issues for you in the future.

  1. Do Firmware Update Again

After you have followed all of the three hacks mentioned above, try to update the firmware of your Netgear Orbi router to its most recent. To avoid making mistakes while executing the process this time, refer to the instructions in the user manual of your device. It consists of the steps on how to do Netgear Orbi firmware update using the manual method as well as the Orbi application. You can implement any method that you like.

  1. Reset the Netgear Orbi

In case not even one of the aforementioned troubleshooting hacks help you to resolve the Netgear Orbi firmware update failed issue, then you need to reset your device without wasting any more time. Once done, set it up from scratch. For your information, whether you want to do Orbi CBR750 setup or configure any other Orbi model by Netgear, three methods can be used: the WPS method, the Manual method, and the Orbi application.

In case you want to know how to set up your networking device in a simple manner, then you have got to take reference from where you did in the previous hack.

In Conclusion

These were some of the best troubleshooting hacks through which one can easily resolve the Netgear Orbi firmware update failure issue with ease.

We hope that after following the tips given above, you will now be able to gain access to an enhanced performance of your Orbi device. If you would like to share your feedback regarding this article, then it is recommended that you do so by making use of the comment section. Your fellow readers might like the little effort made by you.