You can feel really irritated when your ice dispenser or the refrigerator is not working properly and especially when it’s summer. Below are some of the measures that you can follow in order to identify and solve this problem. If still the issue is there, then it is better to look for the help of fridge repair Fort Lauderdale.
How to Fix a Refrigerator Ice Dispenser Not Working
1. Check the Ice Maker
Prior to turning on the detector, it is necessary to make sure that the ice maker creates ice. Locate the refrigerator, look at the inside, particularly at the ice tray to find out if there are ice cubes. This problem could therefore point to the ice maker’s functionality instead of the dispenser in the case that the tray is not full.
Reset the Ice Maker
In some cases, one might try to reset the ice maker in order to solve the problem. Turn off the refrigerator for a minute and then turn it back on. Allow a few hours to pass and check if the ice maker resumes the formation of ice.
2. Check the ice maker mechanism
If ice is being made but is not being dispensed, check on the dispenser component of the machine.
Clear Ice Chute Blockage
There should be adequate ice supply to the ice maker, so check the ice chute, if there is any blockage or jam. Hopefully ice cubes are stuck in the chute, you should remove them.
Ensure Dispenser Door Functionality
Check the operation of the dispenser door Specifically, the door to the dispenser should open and close smoothly. If the door is stuck it may cause the unit to not dispense ice at all or offer it partially.
3. Check the Auger Motor
Auger motor moves the ice through the dispenser, thus is an important component to the whole system. If the auger motor is not working, then the ice will not be released and this parameter should be monitored since it affects the process.
Test the Auger Motor
Take a hold of the handle of the freezer and pull it down, press the ice lever. If you hear the motor running, but no ice is dispensed that might be a problem with the auger.
Inspect the Auger
Take out the ice bin and see to it that the auger is free rotating. If for example, the auger is damaged or jammed it has to be replaced.
4. Verify the Dispenser Switch
The dispenser switch controls the other dispenser constituents and triggers the auger motor.
Test the Switch
Actually, a multimeter can be employed to test for continuity of the dispenser switch. If the switch happens to be a faulty one then it will require replacement.
5. Pour water in the inlet valve
The ice maker is specialized with a water inlet valve which determines the supply of water to the ice maker. If this is torn, the ice maker cannot receive water and hence the failure to produce ice.
Inspect the Valve
Check to ensure that the valve is open, water supply is getting to the ice maker. Lack of water supply may be attributed to blockage on the valve or there is a problem with it.
6. Examine the Control Board
The main features of the ice dispenser can be managed by the control board. If it’s damaged, a lot of the dispensers within the system may not function properly.
Test the Control Board
If all other elements are alright but the dispenser, then it means the control board has to be checked and may require a technician to replace it.
7. Ensure Proper Electrical Connections
Another heartbreaking reason is loose or damaged wiring, which may cause problems with the ice dispenser.
Check Wiring
Check out the wiring harness of the dispenser components. Check that all contacts are well made and there is no sign of any sort of abrasion.
8. Inspect the Dispenser Actuator
One of the interface points that must be discussed is the dispenser actuator to the dispenser switches; which the later supports the auger motor alongside other parts of the dispenser.
Test the Actuator
Loud buzzing may be present if the dispenser actuator is damaged and may not activate the switches required or may not activate the switches at all. Check the dispenser actuator if you see some issues with it then replace it.
9. Clear Ice Bucket Jams
It becomes evident that the ice bucket in one way or another also poses the problem at times. The ice cubes themselves can become jammed in the bucket; this way, they will not be able to traverse the dispenser.
Check the Ice Bucket
Take out the ice bucket and see for any jam stuck on it. Make sure ice is not blocking the path of the auger or the dispensing area.
10. Clean the Dispenser Area
Most of these problems can be eliminated by maintaining a clean platform for dispensing of the items.
Regular Cleaning
The flow of ice should not be hindered by any dirt that might be built on the ice dispenser hence one should ensure that the area is clean.
Conclusion
Refrigerator ice dispenser repair is usually easy simply because you can resolve some of the common issues by carrying out simple fixes. In this way you can diagnose the situation and, perhaps solve it without the help of a professional.
Nevertheless, if you experience some difficulties you cannot solve on your own, you should turn to fridge repair Fort Lauderdale for help. Thus, they can guarantee that your refrigerator and ice dispenser will be up and running within the shortest time possible.
